Paint Protection Film creates the ultimate layer of protection between your vehicles paint and damage from the elements. Paint Protection Film (PPF) serves as the front line of defense to protect your investment.
What Is Paint Protection Film?
While Paint Protection Film is widely known today for its Automotive uses, the technology origin dates all the way back to the Vietnam War. During this time, a film was created by 3M for military helicopter rotor blades as they were often damaged by debris, causing malfunctions and costly repairs.
Paint Protection Film is a lightweight urethane protective layer of film applied on painted surfaces. The invisible urethane film sticks to your vehicles paint, acting as a shield against the elements and preventing damage from rock chips, bugs, hard water, bird droppings, chemical stains, UV rays, etc. Because it acts as a sacrificial protective layer, the Paint Protection Film will absorb the impact from a small pebble or other debris rather than leave a scratch on your vehicle.
- Front Bumper
- Front Half of the Hood
- Partial Fender
- Side Mirrors
- Front Bumper
- Full Hood
- Full Fender
- Headlamps
- Side Mirrors
For gloss finished paint work, Our Paint Protection Film is the most advanced paint protection film available. The vehicle Paint Protection Film is extremely durable with a 10-year manufacturer’s warranty. It utilizes a self-healing topcoat to eliminate swirl marks and scratches. Gloss PPF will transfer the natural color of the paintwork perfectly and will be undisguisable from factor paint.
For Matte and frosted factory paint colors, or when we want to transform a gloss finish to satin, we have Matte PPF. This Film provides the same long-term protection as Gloss/Clear Film, however, utilizes a satin topcoat instead of gloss. This is a great way to customize the look of your car. Matte allows the natural paint color to transfer through the film perfectly, even metal flake, for a very health finish.
STAY IN THE LOOP
The Ultimate Paint Protection
Paint Protection Film is scientifically formulated to create a strong, protective layer over your vehicles paint. When you have PPF professionally installed, you can enjoy driving your vehicle without the worry of damage to your paint.
-
Self-healing topcoat
Should your PPF sustain light scratches or swirl marks, these can be healed with heat activation to the surface of the film.
-
Damage prevention.
PPF blocks hard objects and debris from hitting your paint, saving you from unsightly nicks, chips, stains and scratches.
-
Non-yellowing
PPF stays transparent and will not yellow after prolonged exposure to UV rays, or from exposure to harmful solvents found in bird droppings, gas, oil, and more.
-
Edge seal technology
Some Paint Protection Films lift at the edges. Not so with our signature edge seal technology. Your vehicles PPF will be sealed to the paint, keeping it protected against any contaminants.
-
Stain resistance
Hard water spots, mineral deposits, acidic contaminants, and stains will be a thing of the past with PPF.
While Paint Protection Film will protect your paint and keep its appearance looking new, for optimal results, pair your PPF with a Ceramic Paint Coating. A Ceramic Coating will provide both an additional layer of Protection as well as enhance the beautiful gloss and shine of your vehicle.
Professional PPF Installation
Many do not realize that if you apply Paint Protection Film over damaged paint, it will only enhance the damages. PPF necessitates a Paint Decontamination and Paint Correction polishing prior to installation, in order to ensure that it both looks and performs its best.
After a Paint Correction, careful, detail-oriented prep work, installation, and aftercare is essential in order to provide you with optimal results. Many cases of PPF bubbling or failing are due to insufficient preparation and installation. The vehicles surface must be clean in order for the Paint Protection Film to properly adhere.
In order to prevent bubbling and to ensure a seamless finish, our Specialists take great care to fit the film to your vehicle and strive to complete this intricate task as close to perfectly as possible. The installation process includes fitting the film to your vehicle, cutting it, placing it, and then activating and applying it. Then, the vehicle is left to sit to ensure that edges do not lift prior to being released to its owner.
Here at CoaticLab Automotive Studio, our experienced Specialists use only the highest quality products in order to ensure that your Vehicle’s finish shines.
Keep your Vehicle looking it’s best
CoaticLab Automotive Studio is Utah’s Premium Automotive Studio. We offer Paint Protection Film, Ceramic Coatings for paint, wheels, glass and interiors, Tint, and Vinyl Wraps.
Contact us today for more information about all of our services.
